Spiral Pipe Production

HSAW Pipe For Oil and Gas Pipelines

SPPC produces helical submerged arc welded (HSAW) pipe from diameter 6" to 120" SPPC offers the HSAW Pipe Tube or linepipe supplies that use in the oil, natural gas and water industries.

HSAW Pipe For Stractural Usage & Offshore Piles

SPPC produces helical submerged arc welded (HSAW) pipe from diameter 6" to 120" SPPC offers the HSAW Pipe Tube or linepipe supplies that use in the oil, natural gas and water industries.

HSAW Pipe For Water Pipelines

HSAW Pipe For Water Pipelines SPPC produces helical submerged arc welded (HSAW) pipe from diameter 6″ to 120″ SPPC offers

External Surface Pipe Coatings

3 Layer Polyethylene Coating

The 3LPE system is a multilayer coating composed of FBE, copolymer adhesive and high density polyethylene. Three layer polyethylene pipe

3 Layer Polypropylene Coating

The 3LPP System is a multilayer coating composed of FBE, copolymer adhesive and polypropylene. Three layer polypropylene pipe coating system

BITUSEAL Pipe Coating

BITUSEAL® is a polymer-modified bitumen coating system that offers both reliability and affordability to clients. BITUSEAL® pipe coating has an

Fusion-Bonded Epoxy (FBE)

FBE is a high quality corrosion protection system that offers exceptional adhesion to steel surfaces along with excellent compatibility with cathodic protection systems.

Fusion-Bonded Epoxy Pipe Coating

Dual layer FBE is a state of the art coating system that offers the same excellent adhesion and compatibility to cathodic protection systems that single layer FBE offers with the added benefit of enhanced corrosion protection and mechanical resistance.

Low Application Temperature FBE

Low Application Temperature Fusion Bond Epoxy (LAT-FBE) is an FBE powder coating system for special pipeline designs that requires a low application temperature.

Multi Layer FBE Coating

The FBE coating for casings and tubings is a multi-layer powder epoxy system specifically formulated for the external coating of casings & tubings. The system offers a combination of corrosion resistance, flexibility, gauge-resistance, and adhesion to cement.

Multi Layer Liquid Epoxy Coating

These multi component systems can be applied to a wide range of pipes, fittings, and steel structures.

They can also be plant-applied in different multi-layer versions so as to enhance to combined features of the coating system.

Oxidized Bitumen Enamel Coating

Bitumen enamel is a plant applied durable pipe coating based on oxidized bitumen that has been used for many years for corrosion protection of steel pipes.

Powder Epoxy & Polyester Coating

Epoxy powders offer some of the most reliable and proven corrosion protection systems in the industry.

Reinforced BITUSEAL Coating

Reinforced BITUSEAL® is a version of the BITUSEAL® pipe coating system that possesses added mechanical resistance. A stabilized polypropylene jacket enhances BITUSEAL's mechanical properties.

RockGuard Pipe Coating

RockGuard® is a 'bendable' plant applied reinforced concrete pipe coating developed for rocky terrain, rough terrain configurations such as slopes and for road and river crossings.

Internal Surface Pipe Coatings

Cement Mortar Lining Pipe Coating

Cement Mortar Lining (CML) is a continuous lining of dense Portland cement mortar with a uniform finish.

Epoxy Flow Efficiency Coating

Liquid epoxy flow coats are a category of two-component thin film internal coatings which are spray-applied. These coatings are designed for the specific purpose of increasing flow-efficiency within the pipeline.

FBE Coating for Sour Service Pipelines

This coating is a specially designed epoxy powder system used for internally coating sour fluid lines that contain hydrogen sulfide, carbon dioxide or other highly corrosive substances.

FBE Coating for Tubings

This coating is a specially designed epoxy powder coating system used for internally coating the steel tubing and production casing of oil and gas wells.

FBE for Crude Oil Lines

This coating is a specially designed epoxy powder coating system used for internally coating crude oil lines.

FBE for Drill Pipes

This coating is a specially designed epoxy powder system used for internally coating drill pipes.

FBE for Potable Water Pipelines

This internal coating is a highly reliable FBE that meets all the sanitary, health, safety and environmental requirements for potable water pipelines.

FBE for Sea Water Pipelines

This internal coating is a special-purpose FBE that is used for sea water and saline water pipelines.

FBE for Waste Water Pipelines

This internal coating is a special-purpose FBE that is used for brakish water and waste-water pipelines.

Flow & Anti-Corrosion Coating

Flow and anti-corrosion internal coating is a specially designed epoxy powder system used for internally coating general purpose hydrocarbon lines.

Liquid Epoxy Pipe Coating

Liquid epoxy coatings are a category of two-component internal coatings which are spray-applied for water pipelines. These coatings are factory-applied to a variety of different pipelines sizes.

Static Dissipating Epoxy Coating

This coating is a static dissipating epoxy ideal for internally coating pipelines and fittings used for trasporting jet-fuel, aromatic materials or any other material that possesses a low flash-point.

High Temperature Pipe Coatings

High-Temperature FBE Coating

High temperature fusion-bonded epoxies can be applied at different thicknesses both as stand-alone or multi-layer coatings.

ThermoGuard Pipe Coating

ThermoGuard® is an integrated polyurethane foam and FBE based corrosion and insulation system designed for the thermal insulation of pipelines.

ThermoMax Pipe Coating

ThermoMax® is an advanced multi-layer polypropylene insulation coating system designed for high temperature pipelines and offshore thermal insulation.

ThermoSeal Pipe Coating

ThermoSeal® is an integrated PUF and FBE-based corrosion and insulation system designed for the thermal insulation of pipelines that possesses sealed ends which prevent permeation into the polyurethane foam of the coating system, thereby enhancing the reliability and integrity of the entire pipeline.

Custom Coatings

Custom Coating

Custom coating is basically the external and internal coating of valves, t-joints, elbows, fittings, compressors, manifolds, spools, rebars, I-beams, H-beams and ... .